My name William Barney
and I've research a lot about how fiber optics work for any model
for example the Titanic.
I drilled in 1:350 titanic model (it's not very easy to do) and
I was testing a lot things with fiber optics to light from within
titanics hull. I am not sure what kind of light I should use for
fiber optics, But I will find out soon. Hopeful Any questions
or help me out for what kind best for light to use for the fiber
optics. My e-mail is TITANICMODEL@aol.com
1. Cut out of old light lamp off
from mast (do not cut bottom of lamp)
2. Take a Drill (make smaller) hole to thur a tiny mast, So let
a fiber optic go thur.
3. Then make a long cut on the back of the mast, So the fiber
optic can hide with cover putty.
4. Use a clear plastic sheet to cut so as the same size as the
old one on the lamp, cut a tiny piece of plastic for on top of
the lamp and BE CAREFUL when you painting it....
By William Barney -- If
you have any questions or commenst about this proccess, you may
post them to the main forum or email William about them. He will
be happy to assist.