|
Adding details to a model is a
daunting task, but the results will give the modeler a feeling
of accomplishment and pride. There are many details on the model
that may seem impossible to replicate or make. Tiny rods, spar
lengths, and conduits can be very hard to make. Some modelers
make these by using the model trees and make 'pulled sprue' (mentioned
by the Rivet-Counter Tutorial) for the lengths they need. Evergreen
Scale Models has made detailing easier by manufacturing styrene
sheet and strip plastics for modelers to accomplish their task.
For more information and details
on Evergreen Scale Models, see this link:
http://www.evergreenscalemodels.com
Evergreen sheets come in many widths
and sizes that allow the modeler to modify and cut into the shape
they need. They come in many forms also - there are flat/smooth
sheets and there are planking type sheets. If available, these
sheets come in white, black, and clear colors. These sheets can
be used for decking, modifications, or replacement of large areas
on the model. The Evergreen sheets come in a plastic wrapper and
price ranges from $1.00 - $20.00, depending on the size.
On the other hand, strip plastics
made by Evergreen are measured precisely and cut into thin lengths.
They come in rod form and flat thin strips. These can be used
for conduits, spars, piping...and everything else you can think
of! The Evergreen strips come in small plastic wrapper and price
ranges from $0.20 - $11.00, depending on the bulk and size.
Seen here are Evergreen sheets
and strips used on the Titanic bridge area. The bridge roof planking
is done by the planking sheet and trimmed by white plastic strip.
Note the bulwark support stanchions in progress also.
Shown here are various rods used
for the piping on the third funnel and casing. Note the tiny rods
were used for stanchions on the bulkhead of the ship.
Some modeler may opt to modify
the Promenade A Deck and BDeck bulkhead support bars by cutting
the existing ones out and putting Evergreen strips as a replacement.
This can be very difficult to do, but from a distance, they have
a better scale effect than the molded one on the model.
Finally, some minor details on
the stern can always be modified to look scaled and museum quality.
|